Группа компаний "MIRZIP"
| REF. | АРТИКУЛ | ОПИСАНИЕ | ЗАПРОС НАЛИЧИЯ / ЦЕНЫ |
|---|---|---|---|
| 1 | 5.324-040.0 | Pushbutton | |
| 2 | 5.332-457.0 | Spring switch | |
| 3 | 6.630-032.0 | Switch | |
| 5 | 7.303-154.0 | Screw 5x50 -A2-70 (In6Rd) | |
| 6 | 4.321-122.0 | Handhold complete | |
| 7 | 6.649-413.0 | Cable with plug *EU | |
| 7 | 6.649-385.0 | Power cable 7,5m Gummi *EU | |
| 8 | 5.031-603.0 | Holder accessories | |
| 9 | 7.303-205.0 | Screw 4x16-St-10.9-R2R (In6Rd) | |
| 10 | 5.031-981.0 | Strain relief ISS 55-S WUERTH | |
| 11 | 5.044-224.0 | Holder cable | |
| 12 | 4.841-122.0 | Control panel complete M / H | |
| 13 | 4.066-309.0 | Cover complete | |
| 14 | 6.651-433.0 | Pilot lamp green | |
| 15 | 6.646-432.0 | Plug socket *EUROPA | |
| 16 | 6.630-135.0 | Micro switch | |
| 17 | 5.383-840.0 | Label 2200 W | |
| 18 | 7.303-086.0 | Screw 5x30 -10.9-R2R (K-In6Rd) | |
| 19 | 6.303-318.0 | Screw 3,5x12-10.9-R2R (IN6RD) | |
| 21 | 6.424-020.0 | Signal transmitter B/P 228 | |
| 22 | 6.286-400.0 | Insulating mat | |
| 23 | 6.286-398.0 | Insulating mat | |
| 24 | 6.368-340.0 | Edge protection | |
| 25 | 5.049-689.0 | Sheet metal component | |
| 26 | 6.286-397.0 | Insulating mat | |
| 27 | 5.049-690.0 | Sheet metal component | |
| 28 | 5.034-676.0 | Retaining bracket | |
| 29 | 7.312-293.0 | Washer 4-A2 ISO 7093-1 | |
| 30 | 7.311-064.0 | Hexagon nut M 4-A2-70 ISO 4032 | |
| 31 | 7.311-516.0 | Hexagon nut M 4-A2-70 ISO 10511 | |
| 32 | 6.682-562.0 | Circuit board | |
| 33 | 7.303-092.0 | Screw 3x12 -10.9-R2R (K-In6Rd) | |
| 34 | 6.286-399.0 | Insulating mat covering cap above | |
| 35 | 6.368-338.0 | Edge protection | |
| 36 | 5.049-836.0 | Sheet metal component locking part cover | |
| 37 | 6.315-081.0 | Rivet 2,4x7,5 | |
| 38 | 6.375-295.0 | Holding disk | |
| 39 | 6.375-294.0 | Cam | |
| 40 | 6.641-540.0 | Expanding rivet 6,0 | |
| 41 | 6.375-293.0 | Locking plug | |
| 52 | 5.363-264.0 | Seal housing | |
| 53 | 6.343-119.0 | Lock washer | |
| 54 | 4.839-122.0 | Electronics | |
| 55 | 5.042-703.0 | Holder | |
| 56 | 5.731-026.0 | Mat filter | |
| 57 | 5.363-281.0 | Seal | |
| 58 | 7.303-026.0 | Screw 4x16 -A2-70 (In6Rd) | |
| 59 | 6.646-164.0 | Cover frame | |
| 60 | 5.122-131.0 | Flange | |
| 61 | 5.066-709.0 | Cover | |
| 62 | 5.363-303.0 | Seal | |
| 63 | 6.646-313.0 | Plug socket | |
| 63 | 6.646-165.0 | Plug socket | |
| 64 | 7.303-126.0 | Countersunk screw 4x20 -10.9-R2R (In6Rd | |
| 65 | 5.453-016.0 | Connecting sleeve | |
| 66 | 5.063-476.0 | Cover | |
| 67 | 5.324-016.0 | Pushbutton | |
| 68 | 4.440-287.0 | Suction hose DN 35 4M | |
| 72 | 7.306-207.0 | Screw M4x12 -A2-70 (In6Rd) | |
| 73 | 5.046-421.0 | Sheet metal component CU | |
| 74 | 7.312-163.0 | Toothed lock washer A4,3-FST-PH DIN 679 | |
| 75 | 7.311-036.0 | Hexagon nut M 4-CU 2 ISO 4032 | |
| 77 | 5.046-803.0 | Sheet metal component | |
| 78 | 5.365-196.0 | Flat gasket | |
| 79 | 5.066-800.0 | Housing | |
| 81 | 5.443-471.0 | Hosebarb | |
| 82 | 5.114-105.0 | Ring | |
| 83 | 6.902-112.0 | Threaded ring | |
| 84 | 6.902-065.0 | Clamp sleeve | |
| 85 | 6.902-062.0 | Connecting sleeve -DN 35 | |
| 86 | 5.453-036.0 | Connecting sleeve | |
| 87 | 6.906-240.0 | Crevice nozzle DN35 |
