Группа компаний "MIRZIP"
| REF. | АРТИКУЛ | ОПИСАНИЕ | ЗАПРОС НАЛИЧИЯ / ЦЕНЫ |
|---|---|---|---|
| 1 | 5.030-877.0 | Cover tank | |
| 1 | 6.964-030.0 | Valve plug | |
| 1 | 5.060-365.0 | Housing thrust guidance | |
| 1 | 5.063-565.0 | Cover fuel | |
| 2 | 5.030-857.0 | Covering cap | |
| 2 | 4.580-285.0 | Valve complete | |
| 2 | 6.365-340.0 | Grooved ring 14X22X5/7 | |
| 2 | 5.363-290.0 | Joint ring | |
| 3 | 9.036-292.0 | Device cover | |
| 3 | 6.964-022.0 | Check valve | |
| 3 | 5.115-471.0 | Washer | |
| 3 | 5.731-039.0 | Filter | |
| 4 | 6.964-023.0 | Thrust guidance | |
| 4 | 9.001-131.0 | Направляющая | |
| 4 | 6.365-341.0 | Grooved ring | |
| 4 | 5.071-183.0 | Tank fuel lacquered | |
| 5 | 6.964-024.0 | Pressure spring | |
| 5 | 5.553-231.0 | Piston | |
| 5 | 5.042-463.0 | Holder | |
| 6 | 6.964-025.0 | Piston complete | |
| 6 | 9.001-084.0 | Piston complete only for replacement | |
| 6 | 5.332-251.0 | Helical spring | |
| 6 | 6.303-105.0 | Screw M6x20-ST-A2R DIN 7500-1 | |
| 7 | 6.964-032.0 | Valve plug | |
| 7 | 5.030-625.0 | Moulded part | |
| 7 | 7.312-291.0 | Washer 6-200HV-A2R ISO7093-1 | |
| 8 | 6.964-026.0 | Grooved ring | |
| 8 | 7.306-106.0 | Cylinder head screw M8x70 -8.8-A2E ISO4 | |
| 9 | 9.011-494.0 | Седло клапана в сборе | |
| 9 | 9.011-456.0 | Valve seat complete | |
| 9 | 6.362-471.0 | O-Ring seal 80,0 X 3,0 -NBR 70 | |
| 9 | 5.063-360.0 | Cover | |
| 10 | 9.001-135.0 | Valve complete | |
| 10 | 9.001-189.0 | Valve complete | |
| 10 | 6.362-635.0 | O-Ring seal 50,0x4,0-NBR 70 | |
| 11 | 5.105-208.0 | Axle | |
| 11 | 6.964-072.0 | O-Ring seal | |
| 11 | 9.081-398.0 | Уплотнительное кольцо 15,6X1,78 | |
| 11 | 5.365-147.0 | Profile gasket | |
| 12 | 9.036-344.0 | Wheel | |
| 12 | 6.964-038.0 | Cylinder head | |
| 12 | 9.001-133.0 | Cylinder head | |
| 12 | 5.071-038.0 | Tank chemistry | |
| 13 | 6.343-168.0 | Lock washer | |
| 13 | 6.964-035.0 | Suction valve complete | |
| 13 | 6.414-028.0 | Filter | |
| 14 | 9.036-345.0 | Wheel cap | |
| 14 | 9.001-067.0 | Coupler | |
| 14 | 6.388-559.0 | Hose clip | |
| 15 | 7.303-082.0 | Sheet metal screw ST4,8X13-A2-70-SCHW (I | |
| 15 | 6.362-078.0 | O-Ring seal 13,3x2,4 | |
| 15 | 6.388-225.0 | Hose DN 7 | |
| 16 | 5.443-229.0 | Hose stem | |
| 17 | 6.339-113.0 | Rubber buffer | |
| 17 | 5.310-065.0 | Nut | |
| 18 | 9.039-060.0 | Sheet metal component pedestal | |
| 18 | 9.039-162.0 | Sheet metal component pedestal | |
| 18 | 4.401-070.0 | Screw connector part neutrally * AUS | |
| 19 | 9.039-054.0 | Frame | |
| 19 | 6.465-031.0 | Connection 3/4 | |
| 20 | 9.011-635.0 | Tank fuel | |
| 20 | 6.964-034.0 | Bush | |
| 21 | 6.362-367.0 | O-Ring seal 25,0 X 5,0 -NBR 60 | |
| 21 | 6.964-082.0 | O-Ring seal | |
| 22 | 6.647-296.0 | Cable with plug *CH | |
| 22 | 6.647-213.0 | Cable with plug | |
| 22 | 6.362-875.0 | Grooved ring | |
| 22 | 6.365-394.0 | Grooved ring 12x20x5,3/2,8 | |
| 23 | 6.903-987.0 | Cable bushing Z12,5E | |
| 23 | 6.964-101.0 | Clamp | |
| 24 | 7.312-167.0 | Toothed lock washer A6,4-FSt-A3E DIN 67 | |
| 24 | 9.036-083.0 | Washer | |
| 25 | 7.304-540.0 | Hexagonal head screw M 6x8-A4-70 ISO 40 | |
| 25 | 7.306-039.0 | Cylinder head screw M8x50 -8.8-A2E ISO | |
| 26 | 6.388-546.0 | Hose clip | |
| 27 | 7.304-397.0 | Hexagonal head screw M8x20-8.8-A2E ISO | |
| 27 | 9.011-203.0 | SUPPLY OF WATER KPL | |
| 28 | 9.048-022.0 | Резиновое кольцо | |
| 28 | 9.001-062.0 | Filter set | |
| 29 | 7.311-510.0 | Hexagon nut M 8-8-A2E ISO 7040 | |
| 29 | 9.081-375.0 | Кольцо круглого сечения 70,0 х 2,5 | |
| 30 | 6.641-238.0 | Receptacles for tabs |
